$64.95
SGADS + GADS LTTD
The SGADS-PKG is a combination package of 2 different GADS products put together at a discounted price sent in a single box. As a package, they work as a set to deliver a better, more comfortable riding experience at a lower overall price.
*Does not fit Street Glide models 2014 and up.
*Not compatible with factory hard lower fairings (does work with soft lowers).
Installation Instructions View Colors
Installation Instructions View Colors
SGADSThe fairing shell will have to be removed to enable access to the plug end at the end of the turn signal wires.
The deflectors install by removing the front turn signals, threading the fixture into the deflector while routing the wire to the turn signal through the small pre-drilled hole in the deflector then reinstalling the two pieces back onto the side of the down tubes.
The opening for the turn signal should have a consistent reveal around the lens and fixture. There is a small amount of adjustment available to center the fixture in the opening.
Reroute the turnsignal wire back to the factory connection. Test the turn signals prior to re-installation of the fairing shell
___________________________________________________________________
All GADS deflectors are made of Polycarbonate plastic and are extremely durable, they should give you many years of trouble free service.
Bob the GADS guy
If you look at the back edge of your lower triple tree and see 3 little plastic plugs or holes this is where your deflector mounts
The bolts that hold the GADSLTTD on are 1/4”X20 tpi. The triple tree is pre-drilled and tapped to accept the included bolts.
If there is any resistance when screwing in the bolts you need to chase the threads with a 1/4”-20 tap to remove any obstruction on the threads (paint,rust,etc.)
GADS is a small cottage industry
Thank you for your support
Made in the U.S.A.
SGADS is a deflector for street glides using the standard fork mount turn signal/ bracket system.
This set of deflectors wrap around the turn signals on the front of the Street Glide rerouting much of turbulence around the rider.
GADS deflectors are designed to relieve the worst of the perceived hammering turbulence experienced by the riders, but not totally move all of the air away from the rider, That is what cars are for.
MADE IN THE USA
*Does not fit Street Glide models 2014 and up.
*Not compatible with factory hard lower fairings (does work with soft lowers).
GADS LTTD is a new, patented air deflector for all Road King, Electra Glide, Street Glide, and Road Glide Touring Platforms from Harley Davidson Motorcycles.
Fits through 2013 Harley models.
GADS LTTD redirects the air from under your Lower Trible Tree down onto your motor, helping you to enjoy your riding experience.
The linear wing approach that GADS LTTD has taken assures that substantially more of the wind and turbulence flowing under the headlight and triple tree, is rerouted down onto your motor, giving you a calm and more comfortable ride.
MADE IN THE USA
Notice:
The bolts that hold the GADS LTTD on are 1/4’x20tpi. The triple tree is pre-drilled to accept the included bolts. If there is much resistance when screwing in the bolts you probably need to chase the threads out with a 1/4-20 tap to remove any obstruction on threads. (paint, rust, etc.)
Glide Air Deflector Systems is not affiliated with Harley Davidson Motorcycles®.
