SGADS
Installation 2014 and up STREET GLIDE deflectors,
(this requires the included hardware package) 4 stainless 5/16” bolts, 4 spacers, 4 washers
Remove the turnsignal brackets, disconnect the small wiring connector, remove the studs set aside save and reuse the washers.
The wiring plug for the signal fit through a 1” hole in the triple tree cover. Thread the wire through the corresponding hole in the deflector. Refasten the connection through the deflector to the wire on the back of the bracket. Put a washer on 2 bolts, fit through the turn signal bracket, install a spacer on the bolts, inside the brackets while not pinching the turn signal wires.
Loosely install the deflector to the corresponding holes on the side of the triple tree. The deflector has some adjustment built in to center the turn signal in the opening.
Check for fitment and pinched wiring as you tighten to specified in the service manual. Over tightening may result in stress fractures in the polycarbonate.
___________________________________________________________________
All GADS deflectors are made of Polycarbonate plastic and are extremely durable, they should give you many years of trouble free service.
Bob the GADS guy
SGADS is a deflector for street glides using the standard fork mount turn signal/ bracket system. This set of deflectors wrap around the turn signals on the front of the Street Glide rerouting much of turbulence around the rider. GADS deflectors are designed to relieve the worst of the perceived hammering turbulence experienced by the riders, but not totally move all of the air away from the rider, That is what cars are for. MADE IN THE USA *Not for Street Glide models before 2014. *Not compatible with factory hard lower fairings (does work with soft lowers). Installation Instructions View Colors
SGADS + GADS LT14 The SGADS14-PKG is a combination package of 2 different GADS products put together at a discounted price sent in a single box. As a package, they work as a set to deliver a better, more comfortable riding experience at a lower overall price. *Not compatible with factory hard lower fairings (does work with soft lowers). Installation Instructions View Colors
