Electra Glide models through 2013, Road Kings and Freewheelers Through Current Models
GADS003 are very easy to install. The GADS003 mount using the bolts that come out of the triple tree of the motorcycle. On a Road King these are the bolts that hold the windshield, and or the spot lamp bracket. On an Electra Glide these are the bolts that hold the spot lamp bracket. The scallop goes up, the angle of the deflector goes out and towards the rear of the motorcycle. Simply remove one bolt or nut at a time, loosely reinstall the nut or bolt then repeat the procedure with the second nut or bolt. You will have to bend the GADS003 to access the hardware but don’t let that bother you, the GADS003 are extremely flexible and will simply spring back into place. When you have the nuts or bolts back into place, torque to specifications.
Do not over tighten as this may cause stress fractures
All GADS deflectors are made of Polycarbonate plastic and are extremely durable, they should give you many years of trouble free service.
Bob the GADS guy
GADS Lower Triple Tree Deflector
This deflector installs to most touring platform H-D motorcycles through 2013
If you look at the back edge of your lower triple tree and see 3 little plastic plugs or holes this is where your deflector mounts
The bolts that hold the the GADSLTTD on are 1/4”X20 tpi. The triple tree is pre-drilled and tapped to accept the included bolts.
If there is any resistance when screwing in the bolts you need to chase the threads with a 1/4”-20 tap to remove any obstruction on the threads (paint,rust,etc.)
GADS is a small cottage industry
Thank you for your support
Made in the U.S.A.