GADS RGB
2015 AND UP ROAD GLIDE
Installation of the GADSRGB is very easy
Note: If your motorcycle has OEM Willie Wings you may want to either trim back the portion that hangs below the fairing or add washers to shim the GADSRGB for clearance.
• Remove the gray protective covering on the deflectors.
• Locate the enclosed package with the four 1/4”X20 tpi bolts and eight washers.
• Locate the threaded inserts on the bottom of the fairing in front of and behind the turn signals, this is where you will install the GADSRGB.
• The deflector mounts inboard of the turn signal, hangs down and flares out in front of your knee.
• Place a washer on each side of the deflector. 4 per deflector. Hold the GADSRGB in place and install the bolts to a snug fit. (DO NOT OVER TIGHTEN)
We are a small cottage Industry
Thank you for your support
GlideAirDeflectorSystem.com
MADE IN THE U.S.A.
GADS LT14
Touring Platform 2014 And Up
Lower Triple Tree Deflector
Remove the protective coating.
Fasten the GADSLT14 to the lower triple tree, using the bolts that hold the fork slider cover.
Apply a small amount of thread lock to bolts and torque to a snug fit
Do not over tighten
(DOES NOT FIT TRI-GLIDE)
The GADS RGB deflector is for Road Glide Custom 2015 models, but does not fit with lowers. GADS RGB comes with the required mounting bolts. The deflector mounts to threaded inserts already on the fairing. The GADS RGB is Dark Smoke polycarbonate. A combination package is also available to include the LT14. MADE IN THE USA Installation Instructions
GADS-PKGRGB = GADSRGB + GADSLT14 (does not work with hard lowers) The GADS-PKGRGB is a combination package of 2 different GADS products put together at a discounted price, sent in a single box. As a package they work as a set to deliver a better, more comfortable riding experience at a lower overall price. Installation Instructions